MINIMAL SET-UP TIME
COMPACT DESIGN
MODERN, COMPACT AND SELF-CONTAINED
XROK introduces the new Rotator 380 screen technology
The XROK Rotator 380 is a modern compact, self-contained, tracked trommel screen which is designed to process mineral, solid waste, topsoil, compost and green waste type products.
​
Working Principle
Physical size separation is achieved as the feed material tumbles down the rotating cylindrical screen containing specific hole sizes. The fines pass through the screen apertures, while the oversize is discharged out of the end of the drum.
Applications
Trommel screens are used in a variety of classification applications including:
-
Mineral selecting
-
Construction and demolition waste
-
Commercial and Industrial Waste
-
Municipal Solid Waste
-
Dry Mixed Recyclables
-
Agriculture and compost
-
Refuse derived fuel or solid recovered fuel production
-
Incinerator Bottom Ash
-
Biomass
-
Green Waste / Composting
Benefits and advantages
-
Steady and smooth operation, low noise and low energy consumption
-
Simple structure with interchangeable drum and mesh.
-
Robust, heavy duty construction allows a wide variety of materials to be screened effectively
-
Maintenance friendly with full service accessibility and central grease points.
-
Direct drum drive.
-
Adjustable brush tensioners.
-
Direct drum drive.
-
Track or wheel mounted.
-
Variable speed feeder and drum
-
JMG display panel
-
Minimal set-up time
-
Long service life, less blockage
THE XROK ROTATOR 380
IS A MODERN COMPACT,
SELF-CONTAINED, TRACKED
TROMMEL SCREEN
FEED CONVEYOR
Belt Width:
​
Belt Length:
​
Belt Spec:
Drive Drum Dia:
Tail Drum Dia:
Gearbox:
Gearbox Ratio:
Motor:
Flow rate:
Adjustable Speed:
​
​
1000mm (39’’)
​
7.6M (299’’)
​
4 Ply 5mm Top
​
280mm (11”)
​
230mm (9’’)
​
Brevini RT160
​
8 : 1
​
Danfoss OMP 315
​
15 LPM (4 US GPM)
​
0-13 RPM (by Webtec FCV)
FINES CONVEYOR
Stockpile height:
​
Belt Width:
​
Belt Length:
Belt Spec:
Drive Drum Dia:
Tail Drum Dia:
Motor:
Adjustable Speed:
Maximum Speed:
​
​
2.49 (8’-0”) Max.
​
900mm (36”)
​
16.0M (630’’)
​
3 Ply 5mm Top
​
280mm (11’’)
​
230mm (9’’)
​
Danfoss OMT 400
​
Yes, by Webtec FCV
​
180 RPM
STOCKPILE CONVEYOR
​
Stockpile height:
​
Belt Width:
​
Belt Length:
Belt Spec:
Belt Drive Dia:
Tail Drum Dia:
Motor:
Adjustable Speed:
Maximum Speed:
​
2.60m (8’-6”)
​
750mm (30”)
​
8.5M
​
3 Ply 5mm Chevron
​
280mm (11’’)
​
230mm (9’’)
​
Danfoss OMT 400
​
Yes, by Webtec FCV
​
180 RPM
​
Stockpile conveyor
​
Stockpile height:
​2.60m (8’-6”)
Belt Width:
750mm (30”)
​
Belt Length:
8.5M
Belt Spec:
3 Ply 5mm Chevron
Belt Drive Dia:
280mm (11’’)
Tail Drum Dia:
230mm (9’’)
Motor:
Danfoss OMT 400
Adjustable Speed:
Yes, by Webtec FCV
Maximum Speed:
180 RPM
Capacities
Hopper:
2.5 Cubic M (3.2Cu Yards)
​
Fuel Tank:
70 Litre (18 US gal)
​
Hydraulic Tank:
265 Litre (70 US gal)
Screen drum
​
Drum Diameter:
1.5M (59’’)
​
Drum Length:
​3.4M (134’’) + 40cm (16”)
Rubber extension
​
Drive Wheels:
​Solid 330mm x 110mm
(13’’x 4.3’’)
Adjustable Speed:
Yes, by Webtec FCV
​
Speed:
0-20 rpm
CAPACITIES
​
Hopper:
​
Fuel Tank:
​
Hydraulic Tank:
2.5 Cubic M (3.2Cu Yards)
​
70 Litre (18 US gal)
​
265 Litre (70 US gal)
Feed conveyor
Belt Width:
1000mm (39’’)
​
Belt Length:
7.6M (299’’)
​
Belt Spec:
4 Ply 5mm Top
Drive Drum Dia:
280mm (11”)
Tail Drum Dia:
230mm (9’’)
Gearbox:
Brevini RT160
Gearbox Ratio:
8 : 1
Motor:
Danfoss OMP 315
Flow rate:
15 LPM (4 US GPM)
Adjustable Speed:
0-13 RPM (by Webtec FCV)
​
Main frame / axle
​
Axle:
TVZ 7.5 mTons (16530 lb)
​
Tyres:
235/75R17.5 x2
​
Hitch:
75mm (3’’) Pintle
Tracks:
Trackline 2.5M (98.4’’)
Power unit and hydraulics:
​
Engine:
CAT 2.2 T
Engine power:
60bhp (44.7kW)
​
Engine speed:
2200 rpm
Flywheel Pump:
1 Triple 36 cc Vivoli
Total system flow:
237 LPM (62 US GPM)
Hydraulic tank capacity:
265 L (70 US gal)
Electrics:
​
Emergency stops:
2 off​
​
Chassis cabling:
Armored cable
​
Start Siren:
Yes – 10 sec delay
Engine shutdowns:
Low oil pressure
High engine temp
Air filter blockage
(selectable)
Fuel contamination
​
​Radio control tracks:
Optional –
wireless RC system
​
Pendant track control:
Yes, plugged in at power
unit end
Safety features:
​
External belt alignment points
External grease points
Engine safety shutdown system
Full safety guarding for nip points
CE compliance
Electrical
​
System Voltage:
12V
​
Emergency Stops:
2 (1 right & 1 left)
​
Siren:
Start, Shut down, Low oil,
High temp, Filter blockage
ELECTRICAL
​
System Voltage:
​
Emergency Stops:
​
Siren:
​
12V
​
2 (1 right & 1 left)
​
Start, Shut down, Low oil,
High temp, Filter blockage
MAIN FRAME / AXLE
​
Axle:
​
Tyres:
​
Hitch:
Tracks:
TVZ 7.5 mTons (16530 lb)
​
235/75R17.5 x2
​
75mm (3’’) Pintle
​
Trackline 2.5M (98.4’’)
POWER UNIT AND HYDRAULICS:
​
Engine:
​
Engine power:
​
Engine speed:
Flywheel Pump:
Total system flow:
Hydraulic tank
capacity:
CAT 2.2 T
60bhp (44.7kW)
​
2200 rpm
​
1 Triple 36 cc Vivoli
​
237 LPM (62 US GPM)
​
265 L (70 US gal)
​
​
ELECTRICS
​
Emergency stops:
​
Chassis cabling:
​
Start Siren:
Engine shutdowns:
​
​
​
​
​
Radio control tracks:
​
Pendant track
control:
2 off
​
Armored cable
​
Yes – 10 sec delay
​
Low oil pressure
High engine temp
Air filter blockage
(selectable)
Fuel contamination
Optional –
wireless RC system
​
Yes, plugged in at power
unit end
SAFETY FEATURES
​
External belt alignment points
External grease points
Engine safety shutdown system
Full safety guarding for nip points
CE compliance
SCREEN DRUM
​
Drum Diameter:
​
Drum Length:
​
Drive Wheels:
​
Adjustable Speed:
​
Speed:
1.5M (59’’)
​
3.4M (134’’) + 40cm (16”)
Rubber extension
​
Solid 330mm x 110mm
(13’’x 4.3’’)
​
Yes, by Webtec FCV
​
0-20 rpm
Fines conveyor
Stockpile height:
2.49 (8’-0”) Max.
​
Belt Width:
900mm (36”)
​
Belt Length:
16.0M (630’’)
Belt Spec:
3 Ply 5mm Top
Drive Drum Dia:
280mm (11’’)
Tail Drum Dia:
230mm (9’’)
Motor:
Danfoss OMT 400
Adjustable Speed:
Yes, by Webtec FCV
Maximum Speed:
180 RPM
​
XROK ROTATOR 380 WHEELED/ROTATOR 380
WHEELED STOCKPILE TRANSPORT DIMENSIONS
​
Length:
​
Width:
​
Height:
Weight:
8.93M / 12.01M (29’4’’/39’5’’)
2.1M (7’)
3.2M (10’6’’)
6 mTons / 7 mTons (13200 lb / 15400 lb)
8.93M 12/ 10.77M (29’4’’/35’4’’)
2.2M (7’4’’)
3.2M (10’6’’)
8.5 mTons / 9.5 mTons (18700 lb / 20900 lb)
XROK ROTATOR 380 TRACKED/ROTATOR 380
TRACKED STOCKPILE TRANSPORT DIMENSIONS
​
Length:
​
Width
​
Height:
Weight:
*All Dimensions are approximate. Xrok reserves the right to alter the specification without notice.
Xrok Rotator 380 wheeled/rotator 380
wheeled stockpile transport dimensions
​
Length:
8.93M / 12.01M (29’4’’/39’5’’)
​​
Width
2.1M (7’)
​
Height:
3.2M (10’6’’)
Weight:
6 mTons / 7 mTons (13200 lb / 15400 lb)
Xrok Rotator 380 tracked/rotator 380
tracked stockpile transport dimensions
​
Length:
​8.93M 12/ 10.77M (29’4’’/35’4’’)
Width:
​2.2M (7’4’’)
Height:
3.2M (10’6’’)
Weight:
8.5 mTons / 9.5 mTons (18700 lb / 20900 lb)
Hydraulic pumps
Triple 33cc Vivoli
Brush
Adjustable tensioners
Cat C2.2 Engine
60HP (45kW)
JMG Control panel
User friendly
Hydraulic controls
Webtec FCV
Screen drum
Adjustable speed 0-20 RPM
AUTHORIZED DISTRIBUTOR
FOR XROK PADDING AND
SCREENING MACHINES
OUR ADDRESS
Authorized distributor:
For sale or rental please contact:
DELTA PIPELINE MACHINERY B.V.
Voltstraat 19, 5753 RL Deurne
The Netherlands
T +31 888 966 966
For inquiries, please fill in the following contact form:
